One side of the 2 x PowerServo module soldered. No problems so far. I copied a capacitor bank from PWM3 where I used some 0803 capacitors. I have to revisit that because they should be 1206 footprint. Voltage here is max 8V and the capacitor bank is not as critical, but I made a note…
Identifying and ordering parts is difficult because the part list is not fixed. My first thought on Camera modules was that I needed to go for expensive, high quaity cameras, but reading tells me a 720P camera is sufficient and that higher resolutions just makes the process slower. Anyway – I decided for some 10.-…
I recently started to look into OpenPNP and decided to build my own Pick & Place machine! I will base the machine on LumenPNP (or IndexPNP as it also is called), but I have already started making changes of my own based on what I see done by others. The first job is to understand…