Just a list of my designs targeting motors with new names so I can keep them apart.
| Name | Voltage | Ampere | Driver Type |
| MC2P12V1A | 12V | 1A | DC Motor controller. |
| MC3P28V2A | 28V | 2-2.5A | 3-Phase micro controller. |
| MC3X60V3ACAN | 60V | 2.5-3.5A | New 3-Phase, 2-Phase or 3x Solenoid driver. Previously called MC3X3ACAN. |
| MC4X24V15A | 24V | 15A (21A) | Stepper, 3-Phase, 2x 2-Phase or Solenoid Driver. This was previously called MC4X15A. |
| MC3P60V100A | 60V | 100A | New 60V 100A Monster 3-phase design. |
| MC3S12V1A | 12V | 1A | 3 x 5.wire Stepper Controller |
| MC8X2P12V1A | 12V | 1A | 8x DC Motor Controller (Raspberry PI Hat) |
RS485 is the default interface, if I use something else I will add a post-fix. I will adapt as we go, the only purpose is to avoid using “3 sentences” to explain what controller I write about.